About Precision photo etched products

Precision photo etched products are meant for a variety of applications that require high-resolution and accuracy. It’s impacts include, but not limited to: aerospace, defense, aviation, optics and photonics, microscopy and micro-optics, microelectronics manufacturing. For many companies these types of products are the key in their growth process due to low failure rates with high fatigue life. Precision photo etched products are obtained through digital printing technologies such as inkjet or electrophotography.

It is important for companies to maintain a competitive edge by optimizing efficiency through research and development of new technologies in combination with precision photo etching processes used to replicate costly prototypes without the need of investing over $10K’s into each design. Precision photo etched products includes;

  1. Aerospace products

This product is most commonly used in the aerospace industry, such as aircrafts and missile parts. Precision photo etched products are made by inserting a liquid containing metallic particles into a photolithographic mask at a high speed. After the design is printed, the liquid evaporates, leaving behind the metallic particles which assemble onto the product in an extremely precise manner possible only with photo etched materials.

  1. Optical components

This product is used for a broad range of optical applications that include components, modules, and systems. Common uses include medical equipment, telescopes, microscopes and other scientific instruments. One large advantage that these products have over other products is that they are not susceptible to the effects of thermal expansion and contraction. This allows these products to be used in high-temperature operating environments (even at high altitudes or in hot environments). Located on top of the discus is a optical clear protective coating. This layer protects against scratches, which is a common problem when discs are handled or transported often.

  1. Microelectronics Manufacturing Products

This product is used in microelectronics manufacturing; specifically, in the fabrication of electronic devices. The process involves the etching of product layers and patterning. Other products that are precision photolithographic include interconnects, flexible circuits, and three-dimensional arrays such as micro-arrays.

The main purpose of precision photo etched products are to replace expensive prototypes with a low cost alternative while maintaining high performance and efficiency in production. The completed products must be with high tolerances and have complete data integrity; which is provided by the photo etched material thanks to its narrow layer lines and uniform surface finish that can be replicated time after time without fail.

The photo etched process is fast and efficient in comparison to the traditional manufacturing process which takes considerably more time and manpower. This efficiency allows companies to save cost while still maintaining quality and value. The speed at which photo etching produces products is 37 times faster than it would if using traditional processes. This means that companies face less of a risk with this process as they could get a product made in only hours, instead of months as with other processes.

Companies experience an increase in overall quality when using this process because the product components are highly precise and no flaws or errors can be made when replicating them (i.e. chlorine contamination or chemical reactions due to heat).

Honda generator eu10i

If you’re looking for a reliable generator that will always be ready to power your home, look no further than the Honda EU10i. It’s an easy-to-use portable generator with a powerful 1.5HP petrol engine and can run at a speed of 3000 watts. But while the Honda EU10i is best for smaller uses around your home, it can also be quickly connected to a bigger fuel tank to produce up to 10,000 watts – enough energy production for anything from larger appliances such as refrigerators and clothes dryers to remote electrical power.

Easy Operation

The Honda EU10i Portable Generator is the perfect generator for small uses around your home. It’s easy to operate, so you can start using it right away even if you’re new to generators. With just four buttons – AC power, gas fuel valve, start and stop – the Honda EU10i has just the right amount of manual controls to make it easy for you. The easy operation also means that you can quickly start and stop the operation without the worry of disturbing other people around you.

Ideal for Home Use

The Honda EU10i is ideal for use in your home. It’s small, so it won’t take up much space, and its lightweight means that you can easily bring it around with you. And with enough power to run a broad range of household appliances and tools, the Honda EU10i is the perfect choice for homes looking to replace their power source and get away from costly utility bills.

Easy Kick-Start System

The Honda EU10i has a unique easy-start system that’s convenient to use and helps keep the generator stable. The propeller engine starts easily with just a kick start. The easy startup is maintained until you shut off power and let the engine rest for 15 minutes. A fully-charged battery can be used for about two hours at maximum power before you need to recharge it.

Carrying More But Still Easy to Use

The Honda EU10i has enough power to run most household appliances and large tools, but it’s still easy to use. It’s powered by an established 5-volt rechargeable battery that takes about four hours to charge fully. The battery can power the generator for about 2 hours when it’s full at maximum power.

A Stop-Engine System that Works Easily

The Honda EU10i is equipped with an emergency stop button that allows you to stop a malfunctioning engine quickly. The stop-start function effectively halts operation and makes starting up easier next time you use the generator. After you press the button, it takes two minutes to restart, so you won’t be left waiting on a functional generator.

Conclusion

The Honda EU10i Portable Generator is a great choice for anyone looking for an easy-to-use generator ready to power small appliances and tools around the home or office. You can plug in your phone lines and charge devices, connect to a central water line or install a sump pump, and power up any other appliances when you’re at home. The portable generator has enough power to run up to two large appliances at once, so be sure to use it while no important tasks are running on the main electrical grid.

Benefits Of Chemical Etching-Bronze

Chemical etching is a modern process wherein the components are selectively removed. Chemical etching is one process that comes with a number of advantages. ETCHING BRONZE is a robust process and consists of Tin and copper. The acid etched bronze comes with a pile of advantages. Here are the top benefits of chemical etching.

1. TOOLING AT A REASONABLE COST

Tooling is digital for etching and this saves a lot of money. You don’t have the need to purchase heavy tools. Digital prototyping allows engineers to recreate a pattern easily.

2. BETTER FLEXIBILITY

The designs of the component can be adapted too easily and it is economical. It can be delivered quickly and at a speed of fewer than 24 hrs.

3. THE GRADES OF THE MATERIAL

This process is suited for any grade of metal. It can vary in thickness between 0.01 mm and 1.5mm thick.

4. NO ADDITIONAL COSTS

The major benefit is that you can remove any part of the metal and change its geometry or shape. All this at no extra cost.

5. A STRESS-FREE AFFAIR

Etched parts of bronze are safe and are not distortion-prone. Distortion is commonly observed in laser or water-jet cut parts. The easy handling of all this makes it a stress-free affair.

6. HIGH PRECISION

High precision is something that is offered through the means of chemical etching. You are sure to get uniform parts. You can also produce a better geometric pattern.

7. COST-EFFECTIVE

The conclusion is that the process of chemical etching is completely cost-effective. The tools are quick to make and they last a lifetime. You may repeat the pattern many times bearing no extra costs.

8. A BETTER BRAND MANAGEMENT

Brand management and inventory become easy with chemical etching making it easy to create brand logos. You can also include parts that contain contact information. You may also number the etched parts for inventory management.

THE APPLICATIONS OF ETCHED BRONZE

Bronze has low metal-metal friction and this paves way for a number of advantages. Etched bronze is safe to use in combustible environments. They are to be used in machine parts and on gears. They are also used in ship propellers. They can also be used in furniture hardware.

THE MANY OTHER FACTORS

* The composition of modern bronze is 12% Tin and 88% copper.
* Bronze has a dull-gold color. It also has dull rings on its surface.
* Bronze oxidizes easily but only superficially. A copper oxide layer is formed on top. This prevents the metal at the bottom layer from corrosion.
* Alloy components play a vital role in deciding the melting point of bronze.
* Copper-nickel, silicon bronze, phosphor-bronze, nickel-brass are some of the bronze alloys.

CONCLUSION

Although the name etching may seem complicated, the process is quite easy. You can get this done at no extra time. You may also save your costs for other work. The many advantages of chemical etching ideally outweigh the disadvantages. So next time when you want to replace a part of the metal, opt for etching rather than trying other methods.

Choice Of Etchants For Mild Steel- A Boon To Business

The most favored metal in the manufacturing industry-steel comes with a list of beneficial properties. Steel comes in many variants that help industries make use of the resilience and durability of the metal. Industries like automotive, electronics and communication, aerospace use etched steel which is a great commodity to make everyday items. A highly cost-effective and accurate process, etching of steel, can be done using various etchants. Here are a few choices:

PICRAL- A GOOD ETCHANT FOR MILD STEEL

First in the list of etchants for mild steel is,picral which is 100 ml of ethanol and, picric acid of 2-4g. The solution that is 4% saturated is commonly and widely used. Picral has served as a very powerful etchant for mild steel. Also, picral and nital can together be used in a 1:1 proportion.

HEYN’S REAGENT- AN EASY SOLUTION

A combination of 40g of copper (II) ammonium chloride and 40g of distilled water-Heyn’s reagent is used to remove phosphorus from mild steel. Copper precipitates on the surface should be removed using distilled water or should be washed off using a wash bottle of distilled water.

OBERHOFFER’S REAGENT- AN ETCHANT FOR SEGREGATION STUDIES

Oberhoffer’s reagent is a popular etchant for mild steel as it is helpful in segregation studies. The reagent is a combination of 500 ml of ethanol, 500 ml of distilled water, 30g ferric chloride, 50 ml of hydrochloric acid, 0.5g of stannous chloride and, 1g of copper chloride. Once the process of etching is over, the etched part is to be rinsed with a mixture of ethanol and hydrochloric acid in a 4:1 ratio.

DIMETHYLGLYOXINE NICKEL TEST-TO REMOVE A COMMON IMPURITY

Nickel is a primary impurity in ancient steel. A simple test is performed to identify this. A bloating paper soaked in dimethygloxine is exposed to the polished area of the steel. The bloating paper is pressed on the area, this exposes the nickel-rich areas creating brown stains on the bloating paper.

VILLELA’S REAGENT-TO EXPOSE THE PROPER GRAIN SIZE

This reagent is

helpful in revealing the needles of plate martensite clearly and cleverly. The reagent is a combination of 100ml ethanol,1 g picric acid, and 5ml of hydrochloric acid. The authentic grain size of tempered steel is exposed using this reagent.

ALCOHOL SODIUM PICRATE-DISTINGUISH IRON CARBIDE AND FERRITE IN STEELS

A solution of 25g sodium hydroxide, 2g picric acid, and 50ml distilled water. This is highly beneficial in differentiating between ferrite and iron carbide in steels. The Etching process carried out with this solution can help determine pearlite lamellae spacing. The solution gives better results when used at 50-70 degrees centigrade than using it at boiling point. When the solution is used, ferrite remains unaffected while the cementite darkens.

Etching can be done by various methods-photo etching, acid etching, etc. Acid etching remains a favorite for artists and is called artists’ technique. Photo etching on the other hand helps to retain the quality of the metal to its perfection without leaving stress on it. Businesses can use the techniques that best suit their needs and demands.

Situations to Use Generators for Sale Honda

When you see generators for sale Honda, you would always think of the perfect times to use these things. As they say, the opportunity is always there but you would somehow fail to take full advantage of it when the time is right. You can only blame yourself for that as you would know there will be times when electricity will pop out because of a variety of reasons. The truth is you would be faced with no electricity so it would be better to use all the gadgets at the correct period of time and you know you will be able to use all the things that you bought when you needed them the most. When you fail to charge them, the time for regretting it will be a bit late as you would end up realize that you won’t have too much time to do that anymore when you realize you will need to do a lot of other things before the day ends.

Most would think about a long road trip then camping in the middle of nowhere when buying generators for sale Honda and with good reason. After all, you would need to find a place to spend the night while the gadgets are all being charged. Yes, it would be a lot faster than you thought it would be as it would be fine at first but you know that it is just getting started and you could charge it up and run it back on for another eight hours. This is why you must get generators that charge up pretty fast so that would be one less thing to worry about. It is actually alright to camp in your backyard then use the generator in order to get a feel of what it would feel like when you actually do it. it is like a preview of some sorts and you won’t even notice the difference. Besides, it is those times when everyone goes nuts.

One ideal situation would be a team building where you are forced to camp out and take out some fake zombies. It is all part of a survival tour where it is all fake and for the sake of having a ton of fun. The generators for sale Honda would come useful when you are in the middle of nowhere and you don’t really know where to get some reception. When your phone runs out of battery due to all that navigating from earlier, then you now know what you must do in order to test the waters so to speak. The truth is your generator must be lightweight because there will be times when you would need to move them in the middle of the night. When that happens, you would have no choice but to carry it since all the other people are fast asleep. Thus, even if you don’t have the strength to lift the generators for sale Honda then a lot of other people would.

Glass Office Doors

The business world is changing all the time and office spaces with it; business owners now want spaces that reflect who they are as a business and the principles that they hold dear. If, for example, a business believes in doing its bit for the environment you will find that they transform it into a completely green space with energy saving measures and little or no use of plastic. How can you transform your business to reflect your philosophies? One simple way is to install glass office doors. They tell the world that you are a modern business that wants to look its best and it tells your employees that they work in an open environment where they are free to be creative and expressive.
Glass office doors are not a new phenomenon in the work place. They have been with us for years but you will still find some businesses have wooden doors, especially if they are still in their infancy. If your office has wooden doors it may be time for you to consider installing doors made of glass because they come with certain important benefits.
The first is that you will let lots more natural light into your office. Why is natural light important? For one thing, it brings a better ambiance into the workplace. Wooden doors will block out light wherever they are installed and this creates a dark atmosphere which is not very good for working. Many studies have shown that employees are more productive when they work in an environment where there is plenty of natural light. You will also have employees putting in more time at the office because they don’t feel so cooped up.
Another benefit of glass office doors is that they help you save space in your offices. If you have small rooms you know that doors can get in the way. Each time a door is opened it swings into the room which makes it smaller taking up valuable space that can be put to better use. If you want to make the most of your office space you should install glass sliding doors. Not only will you eliminate the problem of doors opening into rooms, the spaces will also look bigger because there will be more natural light coming in.
Now that you know the benefits of glass office doors you may be wondering who you should choose to install them. There are many glass door installers in Cambridge but you shouldn’t go with the first one that you come across. Choose a vendor who has a track record for doing excellent work. You can ask them to show you a portfolio of recently completed projects and a few references that you can talk to. Try Go Glass – they are excellent at all types of glass installations. Find out more on https://goglass.co.uk/.

Internal glass door

Whаt mаkеѕ a great Internal Dооr?
Beautiful іntеrnаl dооrѕ are thе fіnіѕhіng tоuсhеѕ thаt саn turn аn оrdіnаrу іntеrіоr іntо аn еxtrаоrdіnаrу one.
Wіth a соnѕtаnt stream оf nеw рrоduсtѕ our internal dооr collection соmbіnеѕ both uр tо thе mіnutе dеѕіgn wіth еxреrt сrаftѕmаnѕhір ensuring аll our doors are built to lаѕt fоr уеаrѕ tо come.
In a country wіth ѕuсh a dіvеrѕе hеrіtаgе thеrе are mаnу dіffеrеnt ѕtуlеѕ оf home wіth dіffеrіng door ѕіzеѕ. Oldеr hоmеѕ were gеnеrаllу built uѕіng thе imperial system wіth thе mоѕt common dооr being a ѕtаndаrd 30″. Although, dереndіng оn the асtuаl builder and thе ѕрасе thеу hаd to wоrk with ѕоmе internal dооr ореnіngѕ were аѕ unіԛuе аѕ thе hоuѕеѕ thеmѕеlvеѕ. Tоdау however, mоrе аnd mоrе hоmеѕ аrе built uѕіng thе metric ѕуѕtеm аnd therefore our aim іѕ tо оffеr аѕ many vаrіаtіоnѕ to furnish еvеrу hоmе. There аrе also a number оf matching Bі-Fоld dооr ѕtуlеѕ аvаіlаblе to help you саn сrеаtе a consistent look wіth еvеn the ѕmаllеѕt оf cubby-holes thаt hаvе mіnіmаl оr very lіmіtеd space to ореn and close.Oftеn іt іѕ dіffісult tо choose bеtwееn ѕіmіlаr рrоduсtѕ. All оur dооr designs соmе іn a rаngе оf sizes аnd vаrіаtіоnѕ tо cater fоr thе majority of hоmеѕ іn thе UK.

Shower Glass

You have chosen shower glass for your bathroom remodel and you are wondering whether there are any specific things you should know before you go ahead with your project. Shower glass is an excellent addition to any bathroom as it will introduce and elegant clean look and it also allows more light into the room while allowing for privacy. Before you go ahead and plan for installation of your new shower cubicle there are a few things you should keep in mind:
•    Know the style of your bathroom. There are two common styles that are used in this kind of project – wide and narrow. If you have a wide shower then you will be better served by a sliding glass shower door but if you are dealing with a narrow space a pivot door is more suitable. If you are going for a fancy design such as round or more than four sides it is best to ask for the advice of an expert in drawing up plans.
•    You should always measure your shower space carefully before you make your purchase of glass shower panels. One of the most common complaints with this kind of installation is that the measurements were not right and homeowners had to buy glass again or have it resized. You can measure yourself a couple of times, but before your purchase make sure that you get a proper installer to confirm your measurements.
•    Choose the type of glass you think will work best. Is privacy is important to you you should choose etched or coloured glass. You should also decide how high you want the shower walls to be. Some people want them to go all the way to the ceiling but in some cases about 5 or 6 ft will do to ensure privacy.
Talk to Go Glass for further guidance about shower glass. You can contact them through https://goglass.co.uk/.

Shower Glass

Choosing the right shower glass is important if you want to maximize on design and functionality. To many people, shower glass is shower glass – why should you choose, when they are all just panels? This is not true. Shower glass comes in different cuts and designs and the one that you choose will depend on your bathroom design and decor. As you make your decision take the following into account:
• You should look at different designs of shower glass as you make your decision so that you can choose one that truly suits your style and decor. Many people will avoid this step because they worry about being overwhelmed by all the designs that are out there. There is a chance that this may happen, but not looking at other designs has its own risks – you could end up limiting your options only to discover later that you could have gone a different way completely.
• You shouldn’t choose your shower glass if you haven’t yet planned your bathrooms. Come up with the basic layout of each bathroom in the home and then decide where you want the shower to be, and whether you want it to be made of all glass or whether you would like one or two walls to be tiled.
• You should also consider the needs of your family. If you have small children it may not be necessary to install glass showers in their bathrooms as they mainly use the bath. You may want to spend the money to install a truly beautiful bath.
Lastly, choose your installer carefully as they are not all the same. We recommend that you go with Go Glass – they are one of the best and they have different shower glass designs that you can choose from.

Glass Doors

Glass is a beautiful, wonderful substance. People have been using glass to create all sorts of effects for many years. Glass can be used in many parts of the home. People use glass for windows. They also use them for doors. Glass doors add lot of sense and personality to any space. A set of glass doors also enables light to stream inside. Lighter spaces help people work more effectively. They also make any space feel brighter and less cramped. Glass doors are a particularly delightful way to bring light into any space. Glass doors allow people to move from one space to the next. When thinking about these kinds of doors, it helps to keep certain things in mind. This includes the size of the doors as well as the type of glass wanted. It also helps to think about the kind of doors people want to have in the space such as clear or frosted glass.

Clear glass is ideal in spaces where people want to let in lots of light. For example, someone may have a view they would like to keep such as a view across the local hills. They want to have glass doors that help keep out the cold while still preserving the magnificent view at the same time. A person may also want to think about privacy issues. For example, privacy between a quiet area such as a library and the kitchen can be a necessity. Using frosted glass doors makes this process easier and pleasant. Frosted glass can be created using patterns that add lots of charm to any space. The frosted glass allows in a lot of light but still keeps the space very private. It also allows people to relax and experience the outdoors without the need to rush outside.